Quality Control Inspector II

POSITION SUMMARY

Quality Control Inspector II is a hands-on role, whose primary responsibility consists of the inspection and measurement of products to ensure that they are in spec at the point of production.

POSITION DUTIES/RESPONSIBILITES

Able to read different measuring gages, understanding of gage calibration, receiving inspection of components, validate process and test reports, In-process inspection, generate Nonconformance reports, read travelers, work with industry and customer specifications, understands QMS function, review P.O. for shipping orders to ensure correct delivery address, prepare paperwork for shipping of product, Customer source inspection, verification of resin mix, understanding of composite inspection, train new inspectors, develop performance metrics, complete corrective action reports, work with supplier quality issues, perform internal audits.

Qualifications

• 5 years minimum experience in Mechanical Inspection
• NDT Ultrasonic Testing experience, Level II preferred
• Experience with AS 9100 and ISO 9001
• ROMER Arm experience, PCDMIS, Verisurf, Polyworks
• Use calipers, micrometers, height gages and scales
• Blueprint reading GD&T, computer proficient
• Generate FAIR per AS9102Must be able to meet ITAR eligibility

PHYSICAL DEMANDS

N (Not Applicable)            Activity is not applicable to this position.O (Occasionally)              Position requires activity up to 33% of the time (0 – 2.5+ hrs/day)F (Frequently)                  Position requires activity from 33% – 66% of the time (2.5 – 5.5+ hrs/day)C (Constantly)                  Position requires activity more than 66% of the time (5.5+ hrs/day)

Physical Demands

Lift/Carry

• 10 lbs or less             F
• 11-20 lbs                   F
• 21-50 lbs                   F
• 51-100 lbs                 O
• Over 100 lbs             N

Push/Pull

• 12 lbs or less             F
• 13-25 lbs                   F
• 26-40 lbs                   F
• 41-100 lbs                 O

Other Physical Requirements

• Must be able to lift and carry items weighing up to thirty-five (35) pounds on a repetitive basis.
• Must be able to stand, walk, bend, squat, climb, kneel, twist, and work at heights on an intermittent basis for up to twelve (12) hours.
• Requires hand manipulation including simple grasping, pushing, and pulling materials.
• Must be able to reach and work above and below the shoulder level.
• Must be able to work with and around forklifts and hazardous machinery.
• Must be able to remain in a stationary position such as working at a desk on a computer for prolonged periods of time.
• Visual acuity skill to detect any flaws in the parts being inspected.
• Ability to wear Personal Protective Equipment (PPE) – Required Safety Glasses